Ensure safety and reliability with our Fire Protection Products, designed for superior fire prevention and control.
Equipped with cutting-edge features for quick detection and response to fire hazards.
Offers a wide range of products tailored to meet diverse fire safety needs.
Conforming to BS 336, IS 902
Working pressure : 150 PSI /10.5 Kg/cm2
Test pressure : 325 PSI / 22.5 Kg/cm2
Outlets:2½ (63 mm) as per BS 336/IS 903
Working pressure : 150 PSI /10.5 Kg/cm 2
Test pressure : 325 PSI /22.5 Kg/cm
Size : 2 1/2” ( 63 mm) as per BS 336 / IS 903
Working pressure : 150 PSI /10.5 Kg/cm 2
Test pressure : 325 PSI / 22.5 Kg/cm
Size : 2 ½” ( 63 mm) / 1 ½”(38 mm)
Working pressure : 150 PSI /10.5 Kg/cm
Test pressure : 325 PSI / 22.5 Kg/cm2
Made in Gunmetal flanged inlet as per ANSI
Made in Gunmetal flanged inlet as per PN16
Made in Gunmetal BSP female threaded inlet
Body : Carbon steel fabricated
Inlet : 4” NB flanged
Working pressure : 150 PSI / 10.5 Kg/cm 2
Test pressure : 325 PSI / 22.5 Kg/cm
Body : Carbon steel
Inlet : 6” NB flanged
Working pressure : 150 PSI /10.5 Kg/cm 2
Test pressure : 325 PSI / 22.5 Kg/cm2
Body : Carbon steel
Inlet : 6” NB Flanged
Working pressure : 150 PSI / 10.5 Kg/cm 2
Test pressure : 325 PSI / 22.5 Kg/cm
Outlet : 4” NB flanged
Working Pressure : 150 PSI / 10.5 Kg/cm 2
Test Pressure : 325 PSI / 22.5 Kg/cm
Outlet : 6” NB flanged
Working Pressure : 150 PSI / 10.5 Kg/cm 2
Test Pressure : 325 PSI / 22.5 Kg/cm
Outlet : 6” NB flanged
Working Pressure : 150 PSI / 10.5 Kg/cm 2
Test Pressure : 325 PSI / 22.5 Kg/cm2
Body : Copper alloy Inlet Connection : Threaded male
Max. working pressure : 150 PSI / 10.5 Kg/cm 2
Hydro testing pressure : 350 PSI / 22.5 Kg/cm2
Size : 1 ½”& 2 ½”
Jet Spray Type
Serrated end for hose fitting 2
6 GPM @100 PSI / 24 LPM @ 7 Kg/cm2
Fixed / Swinging type
Side plate powder coated finish red
Threaded Inlet connection
225 Liter foam tank
vInline inductor 0 to 6% & Jet-Spray nozzle
1 ½” X 30 mtr high pressure rubber braided
High pressure braided rubber hose as per IS 444 Type II / PVC / Thermoplastic as per IS 12585
H x W x D: 24” X 24” X 10”
Lightweight & weatherproof
Wall mounted / self standing
H x W x D: 24” X 30” X 10”
Lightweight & weatherproof
Wall mounted / self standing
H x W x D: 24” X 24” X 10”
Lightweight & weatherproof
UV resistant
Bearing IS 903 mark
Inlet Connection : 2 ½” Male instantaneous
Outlet : Solid jet nozzle
Operating Pressure : 150 PSI Max. / 10.5 Kg/cm2
Finish : Natural polished
IS 8442
Standpost mounted
Carbon steel water ways
Hot dip galvanised
Bronze swivel joint with S.S ball bearings
Flanged inlet
Standpost mounted type
Horizontal 360 & vertical +90 & -45 rotation
Hand-wheel for rotation of swivel joint
Bronze geared swivel joint with self locking
Can be used with jet nozzle or jet spray nozzle
DIFR Tested & TAC Approved
Synthetic polyvalent foam forming liquid, pseudo-plastic consisting of surface
active substances and polymer additives
Having good resistance to contamination of hydrocarbons and to dehydration of polar solvents
IS 6026
Cradle mounted
Made from Aluminium alloy
Range : 1.6 Km
Available in horizontal and vertical mounted
Made from Aluminium alloy
12VDC or 24VDC or 200 V or 440VAC operated
Audiable range in KM is 0.10 to 16
Suitable for use in indoor & outdoor areas
Strong metallic body with rubber edge protector
Built in switchable siren function
Plot No. 612, HSIIDC BARHI PHASE-II, DISTT. SONIPAT, HARYANA Pioneer Enviro Engineers
mradhikaassociates@gmail.com pioneerenvirotech@gmail.com
+91 8570920117
